NEXCOM NISE 104 - Manual (Page 46)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 32 NISE 104 User Manual
Chapter 3: System Setup
Installing a SATA Hard Drive
1.The inner side of the bottom cover is where you will install the SATA drive.
Align the mounting holes of the SATA drive with the mounting holes on the
cover. 2.While supporting the SATA drive, turn the cover to the other side. This will
be the outer side of the cover. Use the provided screws to secure the drive
in place.
SATA Drive
Cover
Inner Side of the Cover Outer Side of the Cover