NEXCOM NISE 2000 - Manual (Page 45)

Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 32
Chapter 3: System Setup
NISE 2000, NISE 2010, NISE 2020 User Manual
Installing a SODIMM 2. Insert the module into the socket at an approximately 30 degrees
angle. Apply firm even pressure to each end of the module until it slips
into the socket. The gold-plated connector on the edge of the module
will almost completely disappear inside the socket.
SODIMM
socket
Locate the SODIMM socket on the board. 1.
SODIMM
socket
SODIMM