Entering setup, Bios main menu – NEXCOM NISE 2000 User Manual
Page 59
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
46
NISE 2000, NISE 2010, NISE 2020 User Manual
Chapter 4: BIOS Setup
Entering Setup
When the system is powered on, the BIOS will enter the Power-On Self
Test (POST) routines. These routines perform various diagnostic checks; if
an error is encountered, the error will be reported in one of two different
ways:
If the error occurs before the display device is initialized, a series of
•
beeps will be transmitted.
If the error occurs after the display device is initialized, the screen will
•
display the error message.
Powering on the computer and immediately pressing <Del> allows you to
enter Setup. Another way to enter Setup is to power on the computer and
wait for the following message during the POST:
TO ENTER SETUP BEFORE BOOT
PRESS <CTRL-ALT-ESC>
Press the <Del> key to enter Setup:
BIOS Main Menu
Once you enter Award BIOS CMOS Setup Utility, the Main Menu will ap-
pear on screen. The main menu allows you to select from eight setup func-
tions and two exit choices. Use the arrow keys to select among the items
and press <Enter> to accept or enter the sub-menu.