Chapter 3: system setup, Removing the chassis cover – NEXCOM NISE 105 User Manual
Page 44
Advertising

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
31
NISE 105/105A User Manual
Chapter 3: System Setup
Chapter 3: System Setup
Removing the Chassis Cover
CAUTION!
CAUTION!
CAUTION!
1. Locate the 6 screws on the bottom side of the chassis cover.
2. Remove the 6 screws on the bottom side of the chassis cover.
Prior to removing the chassis cover, make sure the unit’s power
is off and disconnected from the power sources to prevent
electric shock or system damage.
Advertising
This manual is related to the following products: