Installing a sata hard drive – NEXCOM NISE 105 User Manual
Page 52
Advertising
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
39
NISE 105/105A User Manual
Chapter 3: System Setup
1. Remove the bottom cover before installing a SATA HDD.
2. Locate the internal HDD bracket and remove all the 3 screws on the HDD
bracket.
Installing a SATA Hard Drive
3. Place the 2.5" HDD into the internal HDD bracket then use the screws to
secure the 2.5" HDD in place.
Advertising
This manual is related to the following products: