Appendix d: led programming guide, D: l, Ppendix – NEXCOM NISE 301 User Manual
Page 74: Rogramming, Uide
Advertising
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
60
NISE 301 User Manual
Appendix D: LED Programming Guide
a
PPendIx
d: L
ed
P
roGrammInG
G
uIde
LEDs are provided for custom system design. This appendix provides
definitions and its default setting for the LEDs in the NISE 301 series. The
LED definition is shown in the following table:
Pin
PowerOn
Default
Address
LED1
High
A04h (Bit6)
LED2
High
A04h (Bit7)
LED3
High
A05h (Bit0)
LED4
High
A05h (Bit1)
Control the LED (LED1/ LED2/ LED3/ LED4) level from I/O port A04h bit (6/7)
and I/O port A05h bit (0/1).
The bit is Set/Clear indicated output High/Low.
Advertising