NEXCOM NEX 883 - Manual (Page 19)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 8
Chapter 2: Installation
NEX 883 User Manual
Installing a DIMM
Please make sure to disconnect power supply before adding or
removing DIMMs or the system components.
Step 1. Unlock a DIMM slot by pressing the retaining clips outward.
Step 2. Align a DIMM on the slot such that the notch on the DIMM
matches the break on the slot.
notch
break
notch
break
The DIMM only fits in one correct orientation. It will cause per-
manent damage to the motherboard and the DIMM if you force
the DIMM into the slot at incorrect orientation.
Step 3. Firmly insert the DIMM into the slot until the retaining clips at
both ends fully snap back in place and the DIMM is properly
seated.