NEXCOM NEX 980 - Manual (Page 33)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 22 NEX 980 User Manual
Chapter 3: UEFI Setup Utility
3.3 Advanced Screen
In this section, you may set the configurations for the following items: CPU
Configuration, Northbridge Configuration, Southbridge Configuration,
Storage Configuration, Intel ® Rapid Start Technology, Intel ® Smart
Connect Technology, AMT Configuration, Super IO Configuration, ACPI
Configuration, USB Configuration, Trusted Computing and Voltage
Configuration.
Instant Flash
Instant Flash is a UEFI flash utility embedded in Flash ROM. This convenient
UEFI update tool allows you to update system UEFI without entering
operating systems first like MS-DOS or Windows
® . Just launch this tool and
save the new UEFI file to your USB flash drive, floppy disk or hard drive,
then you can update your UEFI only in a few clicks without preparing an
additional floppy diskette or other complicated flash utility. Please be noted
that the USB flash drive or hard drive must use FAT32/16/12 file system. If
you execute Instant Flash utility, the utility will show the UEFI files and their
respective information. Select the proper UEFI file to update your UEFI, and
reboot your system after UEFI update process completes.
Advanced Main
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
CPU Configuration Parameters CPU Configuration
North Bridge Configuration
South Bridge Configuration
Storage Configuration
Intel ® Rapid Start Technology
Intel ® Smart Connect Technology
AMT Configuration
Super IO Configuration
ACPI Configuration
USB Configuration
Trustes Computing
Voltage Configuration
UEFI Update Utility
Instant Flash
Save & Exit H/M Monitor Boot Security
Setting wrong values in this section may cause the system to
malfunction.