NEXCOM NPT 5850 - Manual (Page 44)

38
6-7 Save & Exit
Save Changes and Exit
To save the changes and exit the Setup utility, select this field then press <Enter>. A
dialog box will appear. Confirm by selecting Yes. You can also press <F4> to save
and exit Setup.
Discard Changes and Exit
To exit the Setup utility without saving the changes, select this field then press
<Enter>. You may be prompted to confirm again before exiting. You can also press
<ESC> to exit without saving the changes.
Load Optimized Default
To restore / lead default all values for all the setup options. Confirm by selecting Yes
to apply optimized default settings.