Appendix c: triple display settings – NEXCOM NDiS 167 User Manual
Page 75
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
61
NDiS 167 User Manual
Appendix C: Triple Display Settings
Appendix C: Triple Display Settings
NDiS 167 is capable of driving triple display from DisplayPort, HDMI, and
DVI simultaneously. However, the default setting of Active Display in Intel®
Graphic and Media Control Panel is dual display. So you need to change to
three in Active Display if you would like to have triple displays.
As DisplayPort is still not a popular interface in most displays, you may need
to use adapter to convert the interface to HDMI, DVI, or VGA. Note that only
active mode adapter can be used for correct signal conversion
Operating systems supporting triple displays: Windows 7/ Windows Embedded Standard 7