Installing a 2.5” sata hard drive – NEXCOM DNA 125B User Manual
Page 36
Advertising
Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved.
22
DNA 125B User Manual
Chapter 3: System Setup
Installing a 2.5” SATA Hard Drive
Please correctly follow the below instructions and noted items
to avoid making unnecessary damages.
1. Remove the screws on the hard drive bracket.
Screws
Screws
SATA data and power connector
HDD
bracket
CAUTION!
CAUTION!
CAUTION!
2. Place the SATA hard drive onto the hard drive bracket with the SATA
data and power connector facing outwards. Align the mounting holes
on the bracket to the mounting holes on the HDD, then secure the HDD
with screws.
Advertising