Installing a so dimm – NEXCOM NSA 5150 User Manual
Page 53
Advertising
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
39
NSA 5150 User Manual
Chapter 3: System Setup
Installing a SO DIMM
1. Locate the SO DIMM sockets on the board.
2. Release the locks on the SO DIMM sockets.
3. Insert the module into the socket at an 90 degree angle. Apply firm even
pressure to each end of the module until it slips into the socket.
4. While pushing the SO DIMM into the position, the lock will close automatically.
Advertising