NEXCOM NSA 5150 - Manual (Page 58)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 44 NSA 5150 User Manual
Chapter 3: System Setup
Mounting screw Cover plate
Installing a LAN Module
The system is equipped with 1 LAN module bay. To install a LAN module,
please follow the instructions below.
1. Remove the screw on the cover plate of the LAN module then put them
in a safe place for later use.
Please correctly follow the below instructions and noted items
to avoid making unnecessary damages. Make sure the power
supply is switched off and disconnected from the power sources
before replacing or adding LAN modules to prevent electric
shock or system damage.
CAUTION! CAUTION! CAUTION!
2. Place the LAN module into the tray making sure the connector side of
the module is facing inwards.
Connector
side