Daewoo DPB-280LH - Manual (Page 27)

26
DESCRIPTION
Signal from Remote Controller put in only Control Data Signal at Micom Terminal of Number 33, which is gotten
fid of Carrier (38KHz) from Receive Module. Signal Wave repeat third as following Fig 5-1.
But in Secondary Wave Custom Code is Reversed Face.
LEADER CODE
CUSTOM
CODE
DATA
CODE
CHECK
SUM
TAILER
9ms 4.5ms 16bit 16bit 24bit 8bit
Fig 5-1 Fig 5-2
BIT STRUCTURE
Remote Controller(5)
0.56ms 0.56ms 1.69ms
1.12ms 2.25ms
bit 0 bit 1