Ölens Technology XPJ Projector - Manual (Page 10)

- 19 -
Helpful Information
Technical Summary
Resolution  640 X 480 pixels (VGA)
Projection  50 inches at 2 meters
Support  Composite Video (AV) – RCA jack
 S-Video
  VGA / PC jack
Power  AC / 120V
Lumen Flux  300 LM
Audio  Built-in Stereo 2W X 2 speakers
Life of Lamp  300 Hours (easy to replace)
Control keys  menu, up / down, enter / exit, DC
Power (ON / OFF)
AC Power Switch
Low Noise Fan x 3
Dimensions
 390 x 200 x 103 mm (W x D x H)
Accessories  Remote Control Hand Set
 Replacement lamp with holder
 Power cord
i
- 20 -
If Something Goes Wrong
Troublshooting Tips
Problem
1. Fans are
running,
but light is
not ON
Solution
a. After turning toggle switch on
the side of the projector to the
ON position, press ON/OFF on
the remote or the ON button
on top of the projector.
b. Replace the light bulb.
c. After replacing the lamp cover,
confirm that the cover is in
place and the lamp cover
mounting screw is screwed in
tight.
d. Look at all three fans and
confirm that they are spinning
when the power is ON.
CAUTION: DO NOT
ATTEMPT TO STICK
ANY OBJECTS INTO
THE FANS
If one of the fans is not
spinning, the lamp will not turn
on and the projector must be
returned to the factory for
servicing.
?