Ölens Technology XPJ Projector - Manual (Page 2)

- 3 -
Table of Contents
Important Safety Information
Precautions 4
Operating Instructions
Features of Your Projector 6
Using Your Projector 7
Storing Your Projector 8
Turning Off Your Projector 9
Helpful Information
Menu Options 10
Remote Operation 12
Replacing the Lamp 15
Replacing the fuse 18
Technical Summary 19
If Something Goes Wrong
Troubleshooting Tips 20
Miscellaneous
Quick Start Guide 23
Appendix 24
Glossary 26
!
O
?
m
i
- 4 -
PRECAUTIONS TO AVOID POSSIBLE
DAMAGE TO PROJECTOR OR USER
 NEVER under any circumstances should
the projector be powered down by pushing
the toggle button on the side. Turn off
projector using the buttons on top of the
projector (see “Turning Off Your Projector”
for complete instructions). If this procedure
is not follow, the projector will overheat
and cause extreme damage to the
projector.
 Only use the power supply included in the
unit.
 Only use 120v/4A fuses when replacing
the fuse.
 Do not touch any inside metal parts,
especially when replacing the lamp.
 Use the clips on the bottom of the spare
lamp as a tool to lift and remove the
original lamp. Do not use any other tool to
remove the lamp (see “Replacing the
Lamp” for complete instructions).
Important Safety Information
Precautions
READ ALL SAFETY INFORMATION BEFORE USING
!