Air inlet / discharge tub, 1 install the discharge tube, Air inlet / discharge tube installation -1 – Paxton Superchargers Mustang Renegade Class User Manual
Page 11: Install the discharge tube -1, Air inlet/discharge tube installation
P/N: 4809622a
©2006 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
07SEP06 v2.0 MusRenegade(4809622a v2.0)
4-1
Section 4
AIR INLET/DISCHARGE TUBE INSTALLATION
4.1
INSTALL THE DISCHARGE TUBE
RENEGADE SLEEVE ATTACHED TO
NOVI 2000 (CUTAWAY)
A.
Install the discharge tube to the NOVI 2000
supercharger. (See Appendix “G”.)
B.
Attach one 3.00" sleeve to the discharge of the
supercharger with two T-bolt clamps that are
provided. Leave the clamps loose.
C.
Install (item #2 4PFA012-071) to the 3.00"
sleeve just installed to the discharge of the S/C.
D.
Attach a 3.00" sleeve and clamps to the dis-
charge duct (item #1 4PFA012-051) and attach
duct to item #2 previously installed to the dis-
charge of the S/C.
E.
Attach two 3.00" sleeves and clamps to the dis-
charge duct (item #3, 4PFA012-061), and attach
to the previous duct that was installed.
F.
Adjust ducts for alignment and tighten clamp
G.
To be legal for the Renegade Race Class, install
the Renegade Venturi Sleeve at the inlet of the
supercharger. (See Fig. 4-a.)
Fig. 4-a