Paxton Superchargers Dodge Viper - Manual (Page 17)

5-1
P/N: 4809643
©2004 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
12APR04 v1.1 01-03Viper(4809643v1.1)
Section 5
REPLACEMENT SHOCK TOWER SUPPORT INSTALLATION
A. Install the supplied shock tower brace onto
each shock tower with the chamfered corner
pointing forward. Use the factory bolt and
nut and the supplied M10 x 20mm bolt and
washer in the top two holes.
B. Using a 13/32" bit, drill the remaining hole
in each shock tower using the installed parts
as a template. (See Fig. 5-a.)
C. Install the supplied M10 x 25mm bolts
through the drilled holes and tighten using
the supplied nuts and washers. (See Fig.
5-b.)
***NOTE***
Bracket is slotted to provide supercharger pulley clear-
ance on different vehicles.
5. REPLACEMENT SHOCK TOWER SUPPORT INSTALLATION
Fig. 5-a / Passenger’s side shock tower brace
Fig. 5-b / Driver’s side shock tower brace
FACTORY BOLT AND NUT
SUPPLIED M10 x 20mm BOLT AND
WASHER
SUPPLIED M10 x 25mm BOLT, NUT
AND WASHERS