Pointmaker CPN-5800 - Manual (Page 118)

Page 112 - Pointmaker CPN-5800 Color Video Marker Pointmaker LLC
Overview Section Six:Using RS-232 Commands
(CPRT) Read Current Image from TFTP
The “CPRT” command reads the current image from the TFTP location based on
the current file Capture settings (See “Capture Options” on page 46).
<Esc>(CPRT Read the current image from the TFTP location
(CPSD) Store Current Image to USB
The “CPSD” command stores the current image to the USB flash drive based on
the current file Capture settings (See “Capture Options” on page 46).
<Esc>(CPSD Store the current image to the USB location
(CPSS) Store Current Image to SMB
The “CPSS” command stores the current image to the current SMB destination
(See “Capture Options” on page 46).
<Esc>(CPSS Store the current image to the SMB location
(CPST) Store Current Image to TFTP
The “CPST” command stores the current image to the current TFTP destination
(See “Capture Options” on page 46).
<Esc>(CPST Store the current image to the TFTP location