Pointmaker CPN-5800 - Manual (Page 127)

Pointmaker LLC Pointmaker CPN-5800 Color Video Marker - Page 121
Section Six:Using RS-232 Commands Overview
(IFD) Set Image File Directory
The “IFD” command sets the directory for the image file to be saved.
<Esc>(IFDccc... Set the file directory. ccc... is no more than 16 characters,
terminated with a carriage return.
(IFI) Set Image File Index
The “IFI” command sets the image file index, designating where the numbering of
saved images will start.
<Esc>(IFInnnnn Set the image file index. nnnnn is a five digit number. The
combination of image file prefix and index must be equal to or
less than 8 characters.
(IFP) Set Image File Prefix
The “IFP” command sets the image file prefix to be used for saved images.
<Esc>(IFPccc... Set the image file prefix. ccc... is less than or equal to 3 characters,
terminated with a carriage return.
The combination of image file prefix and index must be equal to
or less than 8 characters.
(IM) Identify Mode for Multiple Users
The “IM” command designates the mode to use when multiple digitizing tab lets
or touch screens are installed. When PRIORITY USER mode is selected, you will
also need to send the command designating which controller (COMM #) is the
priority user.
<Esc>(IMO Assigns Open Mode.
<Esc>(IMS Assigns Selective Mode.
<Esc>(IMP Assigns Priority User Mode.