Signamax 10/100/1000BaseT/TX to 1000Base SFP PoE/PoE+ Converter - Manual

065-1050GSFP PoE Media Converter
10/100/1000BaseT/TX to 1000Base SFP
(IEEE 802.3af/at PSE)
Quick Installation Guide
FCC Warning
This device has been tested and found to comply with
limits for a Class B digital device, pursuant to Part 2 and
15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates and radiates radio frequency
energy and, if not installed and used in accordance with
the user’s manual, it may cause interference in which case
users will be required to correct interference at their own
expenses.
CE Warning
This is a Class B product. In a domestic environment, this
product may cause radio interference in which case
the user may be required to take adequate measures.
Introduction
The Signamax 065-1050GSFP PoE Gigabit Ethernet
Media Converter is designed to bridge a 10BaseT,
100BaseTX, or 1000BaseT copper connection to a
1000Base SFP fiber optic module
. It’s used to extend the
distance connection between two twisted-pair devices at
Gigabit Ethernet speed via the fiber cable transparently,
with no performance degradation.
This PoE PSE Gigabit Ethernet Media Converter is
based on a switching hub design. It can support
Auto-Negotiation and Flow Control functions on the
twisted-pair port.
There are two kinds of PoE Media Converter - PSE and
PD.
A. PSE - Power sourcing equipment is a device
providing power to a PoE Powered Device
(PD).
(The 065-1050GSFP supports either IEEE
802.3at or IEEE 802.3af PDs.)
B. PD - Powered device is a device powered by a
PSE.
(IEEE 802.3af or IEEE 802.3at Powered
Devices are supported by the
065-1050GSFP.)
Package Contents
Before you start to install this Media Converter, please verify
your package that contains the following items:
 One 065-1050GSFP PoE Media converter
 One Quick Installation Guide
 One Power Adaptor 48V / 0.83A
 One AC power cord