Signamax 5-Port 10/100 Compact Industrial Unmanaged Switch User Manual
Physical description, 7405c series, The terminal block and power input
065-7405C Series
1
This quick start guide describes how to install and use the Compact industrial Ethernet Switch.
Capable of operating at temperature extremes of
-10°C to +60°C, this is the switch of choice for harsh environments constrained by space.
Physical Description
The Terminal Block and Power input
The Terminal Block
PWR
Power Input
GND
Power Ground
Earth Ground
DC Terminal Block Power Input: The DC Terminal Block power input can be used to power up this Switch.
The 10/100BaseTX and 100BaseFX Connectors
The 10/100BaseTX Connections
The following lists the pinouts of the 10/100BaseTX ports.
Pin
Regular Ports
Uplink port
1
Output Transmit Data +
Input Receive Data +
2
Output Transmit Data -
Input Receive Data -
3
Input Receive Data +
Output Transmit Data +
4
NC
NC
5
NC
NC
6
Input Receive Data -
Output Transmit Data -
7
NC
NC
8
NC
NC
The 100BaseFX Connections
The fiber port connector has Tx (transmit) and Rx (receive) ports.
The Tx (transmit) port of device 1 is connected to the Rx (receive) port of device
2, and the Rx (receive) port of device 1I to the Tx (transmit) port of device 2.