Televes DVB-S2 COFDM - Manual (Page 18)

DVBS2 - COFDM / COFDM CI
18
CAM MMI
Pulse para
menus
CAM MMI
Press for
menus
CAM MMI
Press
for menus
CAM MMI
Premere
par menu
CAM MMI
Tapez
pour
menus
g. LCN menu
Assign a LCN (Logical Channel Number) (between
1 and 1023) to the existing services at the output
(marked as ON or DCY).
LCN
1/4
Fashion TV
N:0003
LCN
3/4
Soyuz TV
NO LCN
LCN
1/4
Fashion TV
N:0003
LCN
3/4
Soyuz TV
NO LCN
To change the LCN press keys and or . If
select “0000” as LCN will show “NO LCN”.
When it is detected that the LCN displayed value
is assigned to more than one service remind
admiration (!) to the left of the value, will be
displayed to indicate to the user that must assign
other LCN.
h. Remapping menu of service_ids
This menu allows to set the value of the service id
output for each of the configured services to ON /
DCY. Using this option you can change a service by
another previously to OFF and keep on the same
service id, allowing that a large number of receivers
to detect the change automatically without the
need to re- scan.
SID 1/4
FOX CRIME HD
30901>00001!
At the top of the screen shows the index (order) of
the current service and the total number services
present in the output. Then is the name of the
service and finally, on the bottom line of the
screen, the corresponding number with the service
id original and the value of service id in the output.
It is user’s responsibility to avoid setting the
same SID for different services. When detects
that tje shown SID value is assigned to more than
one service or the value is 0, will be displayed a
symbol of admiration (!) to the right of the value, to
indicate to the user that should change it.
i. Language menu
The last extended menu enables the menu
language to be selected (Spanish / English /
German / French / Italian):
IDIOMA
Espanol
~
LANGUAGE
English
 SPRACHE
Deutsch
LINGUA
Italiano
LANGUE
Francaise
Pressing keys and changes the selected
language.
5.3. Parameters saving
Once a parameter is modified to the desired value
in any menu (normal or extended), to save the
settings press for three seconds. The display will
show the following indication:
Grabando los
Parametros y
rearrancando
...
Saving
settings and
restarting
...
Parameter
gespeichert
& gestartet
...
Salvando l'
impostazione
...
Sauver les
parametres
de config.
...
If the configuration paremeters are modified but
not saved, the previous configuration is retrieved
after 30 sec. in other words, the changes are
discarded.