Toyotomi FF-V30T - Manual (Page 16)

Check
FOR OPTIMUM HEATER PERFORMANCE, THE PARTS SHOWN BELOW SHOULD BE CLEANED REGULARLY:
1. Clean Louvers (ONCE A WEEK)
Dust and stains should be wiped off louvers with a damp cloth.
2. Clean Circulation Air Filter (ONCE A WEEK)
A mesh filter is located on heater cabinet rear side.
Once a week slide the filter up to remove and it
should be vacuumed clean.
3. Check Flue Pipe Area (ONCE A WEEK)
Check the flue pipe joint to make sure connection is firm. Use a vacuum cleaner to
remove any dust or pet hair.
4. Clean Fuel Acceptance Fitting
When dirt or dust accumulates in the fuel acceptance fitting, it should be cleaned,
Check fuel acceptance fitting each time your refuel.
5. Check for fuel leaks
Make it a habit to check for signs of fuel leakage. Wipe off any spilled fuel on the sub
tank and removable fuel tank. Spilled fuel may cause odor or risk of fire.
CAUTION: Be sure to disconnect heater before performing any checks or cleaning.
CAUTION: Allow heater to cool completely before cleaning or maintenance.
SECTION F:
ROUTINE MAINTENANCE
Louver
Ciraulation air filter Circulation fan
15
FF_V30T_Type B_US.qxd 14.6.2 11:51 ページ 15