Dell 1100 - Manual (Page 32)

24 Loading Print Media
www
.dell.com | support.dell.com
• Load a sheet of card stock with the side to be printed on facing up, short edge first, from
the center of the tray.
NOTE: Do not print on media smaller than 3.0 in. (76 mm) wide or 5.0 in. (127 mm) long.
• Load a letterhead in the tray with the design face up, top edge toward the printer.
NOTE: Before you load letterhead, verify that the ink on the paper is dry. During the fusing
process, wet ink can come off preprinted paper.
1100-OM_EN.book Page 24 Friday, May 20, 2005 3:14 PM