TVLogic LVM-170A - Manual (Page 36)

36 Multi Format LCD Monitor
[6] AUDIO
5. Menu Operations
●
Volume
- This item controls the embedded audio
output volume for the internal speakers and
[AUDIO OUT] on the back of the monitor
- Available values are between 0~30.
●
Em. Audio Left/Right
- The item controls embedded audio channel
for left/right audio out of internal speaker
and [AUDIO OUT] in the back of the monitor.
- Available values are Off, CH 1~CH 16, Ext.
Audio with SDI input, and Left : CH1, Right :
CH2 with HDMI input.
●
Level Meter
- Used to control the audio level meter.
- Available modes are OFF, 16CH(HOR.),
16CH(VER.), 8CH, 8CH Side, 4CH and 4CH
Side with SDI input, and OFF, 2CH(Hor.),
2CH(Ver.) with HDMI input.
*16CH(HOR.) : It is displayed horizontally 8CH
on the top-left, and the other 8CH on the
top-right of the screen.
*16CH(VER.) : It is displayed vertically 8CH
on the center-left, and the other 8CH on the
center-right of the screen.
*8CH : It is displayed horizontally 4CH on the
top-left, and the other 4CH on the top-right
of the screen.
*8CH Side : It is displayed horizontally 8CH on
the top-right.
*4CH : It is displayed horizontally 2CH on the
top-left, and the other 2CH on the top-right
of the screen.
*4CH Side : It is displayed horizontally 4CH on
the top-right.
●
Level Meter Group
- Used to set the level meter group.
- Available modes are as below.
* 8CH/8CH Side : [G1+G2]-[G2+G3]-[G3+G4]-
[G1+G3]-[G1+G4]-[G2+G4]
* 4CH/4CH Side : [G1]-[G2]-[G3]-[G4]
●
Level Meter Display (SDI Only)
- The item controls display method of audio
level meter
- Available modes are PAIR and GROUP.
●
Level Meter Reference
- The item sets audio level default.
- Available values are -18dB and -20dB.
- Audio within selected value is displayed in
green and exceeded audio level is displayed
in yellow. Audio exceeding -4dB is displayed
in red.
●
Level Meter Size
- The item controls the size of the audio level
meters.
- Available modes are NORMAL and LARGE.
●
Peak Decay Time
- The item sets decrease time of audio level
meter top area.
- Available value is 0~100. The bigger value is,
the longer decrease time is.