Vectronics VC-300DLP - Manual (Page 2)

VC-300DLP Antenna Tuner Owner's Manual
2
OTHER
Frequency Coverage .............. 1.8 - 30 MHz
Power..................................... 150 watts Continuous; 300 watts pep, SSB
Dimensions............................ 3.5" (89mm) H x 10.2" (266mm) W x 9.4" (240mm) D.
Weight ................................... 3.6 lbs. (1.6 kg.)
CONTROLS / CONNECTORS
FRONT PANEL FUNCTIONS
1. TRANSMITTER
Continuously adjustable input capacitor.
2. POWER / SWR METER
Dual needle meter displays FORWARD and REFLECTED Power in Watts.
The SWR is measured where the two needles intersect on the red scale.
3. ANTENA
Continuously adjustable output capacitor.
4. OUTPUT SELECT
Eight-position rotary switch selects an output coaxial connector.
DIRECT MODE
DMY LOAD selects the internal Dummy Load, bypassing the impedance matching
circuit but providing normal meter readings.
BYP selects the Bypass Connector on the rear panel, bypassing the impedance
matching circuit but providing normal meter readings.
COAX 1 selects the COAX 1 Connector, bypassing the impedance matching circuit but
providing normal meter readings.