WaveWare Call Manager - Manual (Page 12)

WaveWare Technologies, Inc.
“We Deliver Information at the Speed of Light”
Call Manager Software
Configuring the Call Manager Software
NOTE: This Software Must be “ Running ” in order to work. So Please Only “ Minimize ”, Do Not Close or Exit Out of
the Software after you have Finished with the Setup and Configuration.
You should see a Blinking Blue WW Logo in the Bottom Right Corner of your Desktop, possibly under
“ Hidden Icons ” to Confirm that the Software is Running.
To get Started, Click on the “ Configure ” Button to start the Configuration Process, as Shown below. See Fig. 13
Fig. 13
You will be asked if you are sure, as the System is “ Disabled ” During the Configuration Process. See Fig. 14
Fig. 14 Click Yes.
NOTE:
The Call Manager “ Configuration Screen ” has “ 15 Steps ” that will need to be “ Configured/Defined ” in order for
the Software to work Properly with the Pagers, Transmitters and Repeater(s), as well as other Wired and Wireless
Devices, depending of the Application Requirements.
12