wePresent MirrorOp - Manual (Page 4)

Requirements
!
Free to use with wePresent WiPG-1500/wePresent WiPG-2000 receiver
devices (for more info visit www.awindinc.com or local wePresent
distributors)
Free to use with ClickShare for Conference Rooms (CSC) and ClickShare
for Meeting Rooms (CSM) receiver devices (firmware update may be
required, for more info please contact your local ClickShare support)
For other MirrorOp receivers, projection will be stopped after 5 minutes. In
next version user can buy activation key with in-app purchase to use with
all other MirrorOp receivers
!
Setup with 3 easy steps
!
1. Install receiver device
2. Connect to the receiver device
3. Launch the MirrorOp Presenter app and start presentation
!
Network Connection
!
MirrorOp Presenter is best used with MirrorOp Receivers connected to big
screen for presentation. Make sure the phone or tablet is connected to the same
network where your receiver is on, otherwise the MirrorOp Presenter may not
find the receiver you want to use.
!
During the presentation, internet connection is not always necessary, depending
on which feature you use. The following features require internet connection:
Register
Dropbox
Browser
"4
MIRROROP PRESENTER USER’S MANUAL