Xtramus NuWIN V1.1 User Manual
Page 167
162
E-mail: [email protected]
Website: www.
X
tramus.com
XTRAMUS TECHNOLOGIES
®
4.21.6.4 Global Flag
Enable Memory Cost Trace: Trace changes of memory status during run time.
Enable Debug Info Dump (Level 1): Trace the changes of basic work flow.
Enable Detailed Report (Level 2): Trace the changes of detailed work flow, such as
LED status, capture dump data, and link status, etc.
Enable Command/Sequence Report: Detect command loss through its serial number.
4.21.6.5 System Flag
Enable Lookback of XM-2301: XM-2301 is not defaulted with lookback function.
Choose to enable the function.
Disable MAC and Enable PHY Pause Control: MAC is defaulted as enabled. Choose
to disable.
For Learning Packets,
please see section
4.5
for more information.
Filter port information
(traffic flow of counter
report is too large to be
viewed through the Log
window).