Xtramus NuWIN V1.1 - Manual (Page 74)

69
E-mail: [email protected]
Website: www. X tramus.com
XTRAMUS TECHNOLOGIES
®
Choose VLANTag in the Selection dialogue. Please note that the Offset value will
automatically change to 12 if VLANTag is chosen. Users may choose the desired
Mode and Loop count for the configured packet.
After setting, send the defined packet through the chosen port. In this case, it’s (0,4,1).
Move the cursor to port (0,4,2) on the chassis panel.
Choose Start Capture Mode and Stop Capture/View to view the packets received
through port (0,4,2).
Now the contents of the defined packets show with all the customized features
captured through port (0,4,2).