Zektor SoloCAT™ HD MAX - Manual (Page 6)

About the SoloCAT HD™ MAX
The SoloCAT HD
™ MAX HDMI over HDBaseT™ CAT5e/6 extender series is designed to
be HDMI 1.4a compatible and 3D capable, enabling the reliable transmission of the HDMI;
bi-directional IR and bi-directional RS232 signals up to 328ft in 1080p HD (even 4K/2K
resolutions and 3D format).
The SoloCAT HD
™ series is HDMI 1.4 compatible allowing you to take full advantage of
the new technology by supporting much higher resolutions than 1080p or 1440p including
2k (2048x1080p) and 4K (4096
×3072) resolutions. Future versions of this device will add
the capability for Ethernet data channel, allowing other HDMI 1.4 enabled devices to share
a network connection for internet connectivity. There is NO power or ground required for
the SoloCAT HD™ MAX receiver.
Since the SoloCAT HD
™ series has bi-directional IR, it is the perfect device for multi-room
applications and third party control systems. With bi-directional communication from a
remote control or control system, commands can be sent from the remote location back to
the main equipment center or the other way around.
Note: The maximum usable distance depends on the quality and characteristics of the
cables. Higher resolutions and longer transmission distances work better with higher quality
cables with thicker insulation to lower crosstalk between the twisted pairs. Unshielded Cat6
is better than Cat5e in this regard.
For more information about HDMI over HDBaseT technology you can visit www.valens-
semi.com