Zektor SoloCAT™ CAT5 Extenders - Manual (Page 3)

3
Required supplies (Not included)
• Component video cables and either stereo analog and/or RCA digital audio cables.
• Shielded or unshielded CAT5/5e/6 cable.
• Small screwdriver for adjusting picture on receiver module.
Compatible Cabling
Zektor Inc. products are compatible with Cat5/5e/6 data cabling as well as skew free CAT5/5e/6
cabling manufactured for video applications. CAT6 cable, due to the manufacture method, can exhibit
much greater skew than standard CAT5/5e and may require the skew compensation option. Please
contact Zektor Inc. for assistance.
CAT5/5e/6 cabling for the Zektor SoloCAT
™ series must be pinned to meet the TIAEIA
T568A or T568B wiring specification standard. We also highly recommend that
all CAT5 cables be pre-terminated and tested. Cables terminated on-site or in an
existing infrastructure should be tested before use to ensure compliance with the
TIA-EIA T568A or T568B specification. Using incorrectly terminated CAT5 cables can
damage the Zektor SoloCAT
™ product.
Termination Reference Diagrams