Zytronic ZXY110 - Manual (Page 14)

Integration Manual - Issue 1 Zytronic Projected Capacitive ZXY100/110 ® Touch Controller & Sensor 14
INTEGRATING THE CONTROLLER PCB
The components on the rear of the LCD should be arranged to allow a suitable space for the controller
PCB, as shown in Figure 9.
REAR OF LCD READY FOR CONTROLLER MOUNTING
The controller PCB should be positioned so that the flexible cable(s) can reach their respective ZIF
socket(s) without crossing over other cables or PCBs. There should also be sufficient space around the
USB socket to attach the cable. Ideally avoid placing the controller within ~30mm of other PCBs and
cables, as shown in Figure 10.
CONTROLLER POSITION ON REAR OF LCD
FIGURE 9
FIGURE 10