Analog Way Axion - ARC100 - Manual (Page 18)

Chapter 2 : STARTING (continued) AXION
PAGE 18
2-5. HOW TO SET A DEVICE TO A SCREEN (continued)
• Select the Connection type (RS232, UDP or TCP) according to your installation. Then press Edit LAN Settings to open
the IP parameters window.
• Select the IP Address corresponding to your device. The Device IP address is available in Control menu > LAN setup.
Verify in the Device that the LAN port is activate (Control menu > RS232/LAN Port > LAN).
• Press several time on the Axion’s ENTER button to return to the Device list window. Then configure the output. Press
Output setup to open the Output adjustment window.