ARRIS SBM1000 User Guide - Manual (Page 23)

Installing the MoCA Adapters
SBM1000 SMART Video Adapter Kit • User Guide 15
590631-001-a
Figure 11 – Room 1: SBM1400 Adapter Installation
7. Connect one of the power adapters (included) to the Power port on the SBM1400 and plug it
into an electrical wall outlet (see Figure 11).
8. Locate the cable wall outlet (or RF splitter) and electrical wall outlet in the second room (see
Room 2 in Figure 10).
Figure 12 – Room 2: SBM1100 Adapter Installation with Gateway
9. Check if the coaxial cable is connected to an RF splitter. If it is not, then disconnect the cable
from your gateway and connect it to the IN connector on the RF splitter (included); see
Figure 12.
10. Connect a third coaxial cable (included) to one of the OUT connectors on the RF splitter
(included) and the Cable connector on your gateway (see Figure 12).