ARRIS SBM1000 User Guide - Manual (Page 34)

Installing the MoCA Adapters
SBM1000 SMART Video Adapter Kit • User Guide 26
590631-001-a
3 Verizon FiOS Installation
Figure 22 – Verizon FiOS Installation
1. Identify the rooms that you want to add to your home network and make sure there is a
coaxial cable connection in each room.
2. Locate the cable wall outlet (or RF splitter) and electrical wall outlet in the first room (see
Room 1 in Figure 22).
Note
: Although the SBM1100 and SBM1400 adapters are interchangeable, the SBM1400 is
typically located where more than one Ethernet connection is required (see Room 1 in Figure
22).
3. Check if the coaxial cable is connected to an RF splitter. If it is not, then disconnect it from
your Smart TV or set-top box and connect it to the IN connector on one of the RF splitters
(included).
4. Connect one of the coaxial cables (included) to the Coax In connector on the SBM1400 and
one of the OUT connectors on the RF splitter (see Figure 23).
Note
: You can use either OUT connector on the RF splitter (included) for this installation.
5. Connect a second coaxial cable (included) to the other OUT connector on the RF splitter and
the coax connector on the Smart TV or set-top box (see Figure 23).
6. Connect one of the Ethernet cables (included) to one of the Ethernet ports on the SBM1400
and the Ethernet/network port on your Smart TV or other Smart device (see Figure 23).
Repeat for each additional SBM1400 Ethernet connection with other networked audio-visual
devices, if applicable.