ART Pro Audio DMV-Pro - Dual True-Stereo Effects Processor - Manual (Page 41)

- 37 -
starting from the bottom-left speaker. An ‘S’ at the end of the line indicates that both mics pick up sound
from both speakers as with normal Stereo miking. An ‘M’ at the end of the line indicates that both mics are
acting in Mono and are sonically isolated from the opposite speaker. In other words, the left microphone
only picks up sound from the left speaker and the right microphone only picks up sound from the right
speaker. Of course, the ‘M’ mode couldn’t really exist in nature, but it can produce interesting sonic results.
Mic Separation:
Sets the separation between the two microphones, from 0 to 2.2 feet.
Number of Taps:
Sets the number of delay taps taken over the course of the delay length. Up to 12 taps are available in the
amplitude and time pattern set by the Shape of Taps control.
Regen Enabled:
In the Dynamic Class, this control sets the input level range that switches the Regeneration amount from
the preset value to 0. Signals that fall within this control’s setting (for example, above –10 dB) have the
programmed Regeneration amount, otherwise, Regeneration is set to 0.
Regeneration:
Sets the amount of delay feedback, from -99% to +100%. Negative numbers correspond to inverted
feedback.
Shape of Taps:
This parameter sets the spacing, or shape, of the delay taps in both mono and stereo (L/R) patterns. Stereo
taps are designated with an (L/R) in the LCD and are not available with mono routings.