Rotary parameters – ART Pro Audio DMV-Pro - Dual True-Stereo Effects Processor User Manual

Page 49

Advertising

- 45 -

Auto Switch

Wood Cabinet

Concert

Gated

Stereo Split

Dynamic

Spin Up Time

Spin Down Time

Low/High Mix

Speed Adjust

Stereo Spread

Rotor Speed

Stereo Spread

Dynamic Speed

Effect Enabled

ROTARY PARAMETERS:

Dynamic Speed:

Dynamic class can automatically switch between low and high rotor speeds, based on input level. The High

and Low qualifiers determine the rotor speed when the input level exceeds this control’s setting; otherwise,

the rotor speed is at the opposite setting.

Effect Enabled:

In the Gated class, this control sets the audio input level that controls the gating action of the effect.

Signals that fall within this control’s setting are heard and ones that are not are muted.

Low/High Mix:

Sets the volume mix between the rotating low speaker and high horn. The range of this control is from

0 / 100 to 100 / 0, with the ratio representing the percentage of low speaker to high horn.

Rotor Speed:

This parameter is used in Wood Cabinet, Concert, Gated, and Stereo Split classes and determines which

speed (either High or Low) you are currently listening to.

Speed Adjust:

Offsets the high and low rotor speeds, from 50% to 200%. The normal rotary speed is achieved when this

setting is at 100%, but it is adjustable from one half to two times as fast.

Spin Down Time:

Controls the amount of time it takes to go from a high spin rate to a slow spin rate. The range of this control

is from 0 to 20 seconds.

Spin Up Time:

Controls the amount of time it takes to go from a slow spin rate to a high spin rate. The range of this control

is from 0 to 20 seconds.

Stereo Spread:

Sets the stereo-width of the effect. The control has 11 positions, from Mono to Full. When set to Full, the

outputs are full stereo and as this control is decreased, the outputs become mono.

Advertising