Artesyn ATCA-MF106 Installation and Use (September 2014) - Manual (Page 74)

Firmware Upgrade Facility
ATCA-MF106 Installation and Use (6806800M62B) 74
 --upgrade --file=<filename>
 --upgrade --mark --file=<filename>
 --upgrade --file=<filename> --target=xxxxxx
 --verify --file=<filename>
 --verify --upgrade --file=<filename>
 --activate --bank=<bankletter> --device=<deviceID>
 --verify --upgrade --mark --file=<filename>
 --version
Multi character options may be abbreviated so long as they are unique. For example, --full
is equivalent to --full-upgrade. Typing --ver, however, will not work since it matches
both --verify and --version.
Single-character options may be combined without repeating the hyphen, as in these
examples:

fcu –vf /opt/bladeservices/rom/<filename>
 fcu –q –d <device-id>
 fcu –q -t 0x90 <device-id>
 fcu –mb a –d <device-id>
Options are not case-sensitive. For example, --help is equivalent to --HeLp. However,
option arguments, such as filename and device ID, are case-sensitive.
When upgrading firmware, it is strongly recommended that you upgrade only one device at a
time. While FCU performs many checks during upgrade to ensure success, if something goes
wrong and both firmware banks become corrupted, the blade will be inoperable.