Artesyn iVPX7225 RTM Installation and Use (April 2015) - Manual (Page 23)

Chapter 1
iVPX7225 RTM Installation and Use (6806800S35B) 23
Introduction
1.1 Features
The iVPX7225 RTM provides access to the rear IO of the Artesyn 3U iVPX7225 module. The
following physical ports and switch banks are available via the iVPX7225 RTM:
Front Panel Access
 One e-SATA port (Gen3)
 One USB 2.0 Type A USB Receptacle
 One COM Port (Male Micro-Mini DB9 (DTE); RS232/422/485)
 One VGA Port (DE-15 Female)
 Recessed Reset Switch
PCB Planar Access
 Two 1000BASE-T GbE ports (converted from 1000BASE-BX at the VPX backplane)
 Two L-Shaped Internal SATA Ports (One Gen2; One Gen 3)
 Two USB 2.0 Mini-B USB Receptacle
 One COM Port (10-Pin header (DTE); RS232/422/485)
 One Mini-DisplayPort
 One IPMC Debug Port (Mini-B USB Physical Receptacle)
 Eight PCH GPIO Control Signals
 XMC Rear IO Access (VITA 46.9 3U X12d Pattern via Samtec Edge Rate Socket)
 RS422/485 Termination Switch Bank
 Write-Protect Override Switch Bank