Artesyn iVPX7225 RTM Installation and Use (April 2015) - Manual (Page 48)

Functional Description
iVPX7225 RTM Installation and Use (6806800S35B) 48
4.2 Ethernet Interfaces
The Artesyn iVPX7225 module provides two 1000BASE-BX ports that are routed to the VPX
backplane for operation as Ultra Thin Pipes per VITA 65 SLT3-PAY-2F2U-14.2.3 and SLT3-PAY-
1F1F2U-14.2.4 slot profiles.
Ethernet is implemented using an Intel 82580 Gigabit Ethernet controller onboard the
iVPX7225. PCH PCIe Port 0 (lanes 1-4, configured as x4) is routed to 82580. When accessed via
the RTM, in a non-switch backplane configuration, dual PHYs onboard the iVPX7225 RTM
convert these control plane interfaces to 1000BASE-T. These are accessible at the dual RJ-45
RTM planar connector, J101.
Because the Ethernet interface to the backplane is 1000Base-BX, the associated 1000Base-
T ports on the RTM are fixed at 1000Mbit, and cannot auto-negotiate down to 10/100Mbit.
Figure 4-2 SLT3-PAY-2F2U-14.2.3 Slot Profile
Key
Data Plane - 2 Fat Pipes
User Defined
User Defined
Key
S
E
User Defined
Utility Plane
User Defined
Utility Plane
SE
P0/J0
Control Plane - 2 Ultra-Thin Pipes
Diff
P1/J1
S
E
Diff
P2/J2