Artesyn MITX-430/MITX-440-DVI-2E Installation and Use (August 2014) - Manual (Page 31)

Hardware Preparation and Installation
MITX-430/MITX-440-DVI-2E Installation and Use (6806800K37D) 31
2.1.3 Power Requirements (Single Core Processor Board)
The power consumption is tested under the following conditions with:
 1*2G memory
 1*1G memory
 One 2.5" ATA HDD
 One infonion TPM module
 One 3.5" SATA HDD
 One SATA CD-ROM
 One USB keyboard
 One USB mouse
 One PS/2 keyboard
 One PS/2 mouse
2.1.3.1 Full Loading Running Burn-in Test
VGA display only
Personal Injury
During operation, hot surfaces may be present on the heat sinks and the components of the
product. To prevent injury from hot surface do not touch any of the exposed components
or heatsinks on the product. Use the handle and face plate, where applicable, or the board
edge when removing the product from the enclosure.
12V 5V 3.3V Total
Current(A) 0.30 1.8 0.3
Power(W) 3.6 9 0.99 13.59