Artesyn MITX-430/MITX-440-DVI-2E Installation and Use (August 2014) - Manual (Page 76)

Operation
MITX-430/MITX-440-DVI-2E Installation and Use (6806800K37D) 76
Super IO
Configuration System super IO chip parameters, see Table 5-13 on page 81 .
W83627UHG H/W
Monitor Monitor hardware status, see Table 5-22 on page 86 .
Serial Port Console
Redirection Serial Port Console Redirection, see Table 5-23 on page 86 .
Table 5-5 ACPI Settings
Field Description
Enable ACPI Auto
Configuration Enable or disable BIOS ACPI Auto Configuration. Default option is Disabled.
ACPI Sleep State Select the highest ACPI sleep state the system enters when the SUSPEND
button is pressed. The states are:

Suspend Disabled
 S3 (Suspend to RAM)
Default state is S3 (Suspend to RAM).
Table 5-6 Trusted Computing
Field Description
TPM SUPPORT Enable or disable TPM function. Default value is Disable.
When the field is disabled in BIOS, OS does not show TPM function.
TPM State Turn TPM On or Off. Default state is Disabled.
Pending TPM operation Schedule TPM operation, default option is none.
Current TPM Status Information
No TPM Hardware If no TPM is found.
TPM Enabled Status Show TPM status, Enabled or Disabled
Table 5-4 Advanced Menu (continued)
Field Description