Artesyn MITX-430/MITX-440-DVI-2E Installation and Use (August 2014) - Manual (Page 85)

Operation
MITX-430/MITX-440-DVI-2E Installation and Use (6806800K37D) 85
Table 5-20 Parallel Port Configuration
Field Description
Parallel Port Enable or disable parallel port (LPT/LPTE). Default value is Enabled.
Change Settings Select an optimal settings for super IO device. The options are:

Auto
 IO=378h; IRQ=5
 IO=378h; IRQ=5,6,7,10,11,12
 IO=278h; IRQ=5,6,7,10,11,12
 IO=3BCh; IRQ=5,6,7,10,11,12
 IO=378h
 IO=278h
 IO=3BCh
Default value is Auto.
Device Mode Change the Printer Port mode. The modes are:

STD Printer Mode
 SPP Mode
 EPP-1.9 and SPP Mode
 EPP-1.7 and SPP Mode
 ECP Mode
 ECP and EPP 1.9 Mode
 ECP and EPP 1.7 Mode
Table 5-21 Watchdog Timer Configuration
Field Description
Watchdog Timer Enable or disable WDT. Default value is Disabled.
WDT Mode Select watchdog mode, default is Minutes.
Time-Out Set time to wait before system reset without PS2 Keyboard or mouse
operation. Default value is 5.