Daewoo DRHT-630 - Manual (Page 21)

20
After successfully connecting your DVB-T HDD/DVD
Recorder to your TV and other devices, this chapter
will show you how to complete the initial
installation.
1
Switch on your DVD recorder. An ‘Auto Tune’
message is displayed on the screen. Press
[RED] button to start auto tune.
2
The DVB-T HDD/DVD Recorder detects
channels automatically and stores them in the
memory.
3
After finishing Auto Channel Search, save the
settings by pressing [GREEN] button.
4
If you cancel the process during Initial
Installation, you should repeat this procedure.
You must follow the initial installation process to
set the time, date, channels, and language
preferences for the DVB-T HDD/DVD Recorder.
20
Initial Installation Initial Installation
Re-Installation
1 Press [SETUP] and select the 'Restore Default
Settings' using [œ /√]. Then select ‘YES’ to
reset the set (see page 36).
2 Power On, then you will see the 'Initial
Installation'.
3 Repeat the steps 1~3 opposite.
0202DRHT-630 2007.2.2 9:19 AM ˘ ` 20