Daewoo DRHT-630 - Manual (Page 50)

49 49
RECORDING
Timer Recording
7 To modify the timer programme, follow steps 3-7
in ‘Timer Recording using Manual Record Screen’
of page 47.
You can clear a Timer Recording any time before
the recording actually starts.
• Press [TIMER] on the remote control to display
the Timer Record List.
• Use […†] to select the program you want to
erase on the Timer Recorder List, then press
[GREEN] to cancel it.
Cancelling a Timer Recording (EPG)
After a Timer Recording has started, you can still
stop the program by pressing [STOP].
For more details, Refer to ‘Stopping a Timer
Recording in progress’ on page 48.
Stopping a Timer Recording in
Progress
It is not possible to extend the recording duration
time of the timer recording set using the EPG
application timer setting.
Timer Recording Troubleshooting
Recording Priority
• Timer Recording and OTR (One Touch Record)
have the same priority but they have lower
priority than manual recording. During manual
recording, Timer Recording or OTR will be
ignored.
5 Press [RED] to record.
The selected bar becomes red. It means
that a timer recording is associated to that
programme. Your recorder will
automatically begin recording when the
programme starts.
6 Press [RED] once more to edit the program.
The Timer Record List will appear.
Even if a Timer Recording is set, the DVB-T HDD/DVD
Recorder will not record if:
• No disc is loaded in the DVD tray when in
record to DVD mode.
• A non-recordable disc is loaded.
• ‘Lock Disc’ is set to YES in the DISC Operation
menu; see page 61.
• There are already 49 titles recorded on the disc.
You cannot enter a Timer Recording if:
• A recording or playing titles is already under
way.
• The start time has already passed.
• 16 Timer Recordings have already been set.
If two or more Timer Recordings overlap:
• The earlier program takes priority.
• When the earlier program finishes, the later
program starts.
• If two programs are set to start at exactly the
same time, the program entered first takes
priority.
Confirmation is not possible when:
• The ‘Lock Disc’ setting is set to YES.
• There are already 49 titles recorded on the disc.
If the disc is damaged, the recording may not
complete successfully, even if the Check field
shows ‘Rec. OK‘.
0202DRHT-630 2007.2.2 9:19 AM ˘ ` 49