Daewoo DRHT-630 - Manual (Page 32)

31 31
SETUP
Setup menu
Caution
• Once the Progressive Scan setting is entered,
an image will only be visible on a Progressive
Scan compatible TV or monitor. Press
[P.SCAN] to return to Interlace Scan mode.
Video Output
Progressive Scan Video provides the highest picture
quality with reduced flickering.
RGB : If you connect the DVB-T HDD/DVD Recorder
to an analogue television using the SCART jacks,
set Video Output to ‘RGB’.
Interlace or Progressive : If you connect the DVB-T
HDD/DVD Recorder to a digital television (DTV) or
Monitor using the COMPONENT jacks, set Video
Output to ‘Interlace’ or ‘Progressive’.
1
Press [SETUP].
2
Use [œ/√] to select ‘Preferences‘.
3
While ‘Preferences‘ is selected, press [†] to
select ‘Video Output‘.
4
Use [œ/√] to select the desired Video Output
mode.
5
Press [SETUP] to exit the menu.
Rating Level
The Parental Settings feature allows you to
prevent DVDs from being played based on their
ratings or to have certain discs played with
alternative scenes. You can set the Rating Level
from ‘OFF’ to ‘U’ to a maximum ‘18R’.
1
Press [SETUP].
2
Use [œ/√] to select ‘Parental Settings‘.
3
Whilst ‘Parental Settings‘ is selected, press
[†] to select ‘Rating Level‘. The Password
Input dialog will appear. Enter a 4-digit
password using the [0-9] buttons.
4
If this is the first time you have entered a
password, you will be prompted to enter the
password again to confirm it.
Parental Settings
The initial password is ‘0000‘. You must enter this
password before you can change the Parental
Level.
Set the new password to something other than
'0000'.
0202DRHT-630 2007.2.2 9:19 AM ˘ ` 31