Artesyn MVME2500 VxWorks 6.8 User Guide (April 2014) - Manual (Page 27)

Appendix A
MVME2500 VxWorks 6.8 User Guide (6806800L66C) 27
A
Sample Output
A.1 Network Boot
=> run vxboot
Speed: 100, full duplex
Using eTSEC1 device
TFTP from server 10.130.101.216; our IP address is 10.130.101.217
Filename 'vxWorks-2020.st'.
Load address: 0x1000000
Loading:
#################################################################
#################################################################
#################################################################
#########################################
done
Bytes transferred = 3460440 (34cd58 hex)
## Ethernet MAC address not copied to NV RAM
## Using bootline (@ 0x4200): motetsec(0,0)10.130.101.216:vxWorks
h=10.130.101.216 e=10.130.101.154:ffffff00 u=vxworks pw=vxworks
f=0x80
## Starting vxWorks at 0x00100000 ...
Target Name: vxTarget
Bulk Class Driver Successfully Initialized
usbCbiUfiDevInit() returned OK
CBI Class Driver Successfully Initialized
Adding 8266 symbols for standalone.