Audioscan Verifit 2 - Manual (Page 34)

Verifit ® User's Guide Version 4.2 © June 2015
4 General Setup
This section covers Date and Time setup, Display settings (including mouse pointer speed setting) and Saving
test setup.
Date and time setup
To set the date and time that appears on printouts and calibration screens:
1. Press , then highlight and select [Date & Time] on the Setup poster.
2. To change the date, click on the month window to display a drop-down list of months.
3. Select the desired month on the list.
4. Repeat the previous step to change the date, year and time in the appropriate windows.
5. When the new date and time information has been set, press to exit.
Display settings
To change the screen saver timing or mouse pointer speed:
1. Press , then select [Display].
2. To change the idle time before the screen saver blanks the screen to prolong display life, click the Screen
saver window.
3. Select the desired screen saver timing from the drop-down list.
4. In this screen you can also select the Mouse pointer speed button and select the response speed from the
drop-down list.
5. Press to exit setup.
Saving test setup
This feature lets you retain the last-used stimulus type and level for most tests when the power is turned off and
the last-used target method and transducer type in Speechmap and Insertion Gain tests. This feature also lets
you determine how assessment parameters, test levels and stimuli are treated when
, [Erase data] is
selected.
To enable/disable saving of test levels, stimuli and assessment parameters:
1. Press , then click on [Save option]
2. Click [Save test setups on power off] to toggle between Yes and No.
To enable/disable erasing of test levels, stimuli and assessment parameters when Erase data is selected:
1. Press , then click on [Save option]
34